Getting around
- tap HOME
- PERFORM page: CUTOFF, RESO, ENV AMT, RELEASE.
- turn SELECT
- Tempo, on every screen.
- turn ALGORITHM
- Pick track A or B.
- tap OCT-
- Octave down (OCT+ up); both together: back to 0.
- hold FX+tap HOME
- Lock a held layer open; its button lets it go.
Playing
- turn PRESETS
- Pick one of 99 programs (1-64 factory sounds).
- tap ARP+turn KNOB 1
- Arpeggiator mode; OFF switches it off.
- tap ARP+tap ARP
- On the ARP page: HOLD latches the arp.
- hold SAVE+tap SEL
- A new random sound, within useful ranges.
Sound
- tap EDIT
- OSC 1, OSC 2, OSC MOD, FILTER, FILTER +; tap for next.
- tap ENV
- FILTER ENV; tap again for AMP ENV.
- tap LFO
- LFO, LFO DEST, LFO + pages; tap for next.
- GLO twice
- VOICE page: POLY / DUAL / UNISON / MONO, glide.
- tap GLO+tap GLO+tap GLO
- OUTPUT page: VINTAGE voice drift, SPREAD, BEND, VOLUME.
Sequencer / patterns
- tap SEQ
- Full-screen sequencer; tap again for its next view.
- tap PLAY
- Start / stop the sequencer.
- tap REC
- Playing: record on top. Stopped: armed, first note starts.
- hold REC
- 2 seconds: clear the chosen track.
- hold SEQ+white key 1-16
- Set a step with the last note or chord; again clears.
- hold EDIT+tap OCT-
- Undo the last sequencer change (OCT+: redo).
- tap SEQ+turn ALGORITHM+turn KNOB 1
- Switch track B on (16 steps).
- hold GLO+white key 1
- Mute track A (key 2: B; keys 5 / 6: solo).
- hold SAVE+white key 1-8
- Go to pattern 1-8 (playing: at the loop's end).
Effects
- tap FX
- CHORUS, DELAY, REVERB pages; tap for next.
- hold FX+turn KNOB 1
- Chorus mix (KNOB 2 delay, 3 reverb, 4 delay time).
- tap SEQ+turn KNOB 4
- TRACKS: track B's own sound's FX SEND.
Saving & loading
- SAVE twice
- Save the sound in its program slot.
- tap SAVE+turn PRESETS+tap SAVE
- Save the sound into another slot.
- tap SEQ+tap SAVE
- In the sequencer: save the pattern now.
- hold SAVE+black key 1-8
- Copy this pattern to slot 1-8 (used slot: press twice).
Settings
- tap GLO
- GLOBAL: TEMPO, CLICK, MIDI CH, TUNE.
- tap GLO+turn KNOB 2
- Click: OFF, REC, ON, COUNT-IN.
- tap GLO+turn KNOB 3
- MIDI channel or OMNI; the next channel plays B's sound.
- hold GLO+white key 16
- Tap tempo (G5).
Good to know
- An edited sound shows * after its name; turn PRESETS before saving and the edit is gone.
- SAVE arms for 3 seconds (the page shows SAVE?); tap it again in time.
- Track B can play sound A or its own program: choose B with ALGORITHM, then turn PRESETS. The panel then edits B's sound (orange B in the header).
- Patterns save themselves 3 s after a change once the sequencer is stopped.
- Effect mixes belong to each program; the INIT sound starts dry.
- Something wrong after an update? Hold OCT- while powering on: USB rescue screen for reinstalling.
A community cheat sheet by the hub, not by the firmware's makers: when in doubt, their manual is right.