VIBE FM Mk1 Open firmware, officially supported. The first 100 get 10% off Join the list →

The Firmware Hub · FM-1 · Fernbedienung

Fernbedienung for the M-VAVE FM-1

Fernbedienung1.1

by Kabelmaier GitHub ↗

other

Turns the FM-1 into the USB audio interface and the full controller for the iOS app Steckfeld SF1 on iPad and iPhone. The screen shows the same values as Steckfeld, so you can edit every module from the FM-1 without opening the programmer. The hacker crews get their own screens on the FM-1 too.

Text by the maker.

About it

Runs on
FM-1
Release
1.1 · released 18 Nov 2026 · on the hub since 16 Nov 2026603 KB · what's new
Licence
GPL-3.0 · source ↗ · copy on the hub
Flash chip
Every FM-1, the newer chip 0xB36014 too
Identity
FM-1_1492411what it reports over USB while it runs
Build
Built by its maker, not signed

More by Kabelmaier

Like Fernbedienung

Changelog

What changed, version by version3 versions

[Unreleased]

[1.1] - 2026-11-18

Goes with Steckfeld SF1 1.5.0 and newer. Tested on an FM-1 with an iPad.

  • The hacker crews' modules (VÝPIS, COMBINÉ, 曲げ MAGE, SCHLIERE) get the whole screen in their crew's look: picture, tiles, header and footer.
  • README and the Firmware Hub card: the FM-1 is the full controller (every module can be edited from it without Steckfeld's programmer) and the hacker crews have their own screens.
  • The screen fell further and further behind Steckfeld while a picture moved: the FM-1 took one message per drawn frame. It now takes every waiting message before it draws.
  • Knob turns go out once a millisecond instead of once per drawn frame, so Steckfeld sees how fast a knob turns.

[1.0] - 2026-11-16

Goes with Steckfeld SF1 1.4.0. Tested on an FM-1 with an iPad.

  • Keys, knobs and buttons control Steckfeld over USB-MIDI; Steckfeld's screen comes back as SysEx ([protocol](docs/fernbedienung/protocol.md)).
  • USB audio interface for the iPad (44.1 kHz, 8 channels in; Steckfeld plays into pair 1).
  • Screens: Edit with module pictures, Route with cables, the patch list (patches that play a sequence marked SEQ), macro steps, notices, the FM-1's settings; in Steckfeld's display colours, blue by day, red in the dark.
  • EDIT: MIDI channel, velocity and OPEN (Always: picking a module on the FM-1 opens Steckfeld's programmer; Never: it stays closed while the FM-1 is connected, even when a module is tapped in Steckfeld).
  • System settings (hold HOME, press EDIT): theme Sync / Light / Dark.
  • The update loader shows Elektro Kabelmaier's update screen while it writes.

[Unreleased]: https://github.com/DPangerl/fernbedienung/compare/v1.1...HEAD [1.1]: https://github.com/DPangerl/fernbedienung/compare/v1.0...v1.1 [1.0]: https://github.com/DPangerl/fernbedienung/releases/tag/v1.0

CHANGELOG.md on GitHub ↗