VIBE FM Mk1 Open firmware, officially supported. The first 100 get 10% off Join the list →

The Firmware Hub · FM-1 · ObsSynth FM-1

ObsSynth FM-1 for the M-VAVE FM-1

ObsSynth FM-10.2.0 · beta

by Orian Beltrame GitHub ↗

synthbeta

A four-voice synthesizer: two oscillators per voice, each STD (8 waves), SUPER (7 detuned saws, squares, triangles or sines), WT or GRAIN; a 12/24 dB multimode filter, two ADSRs, two LFOs, unison, delay, reverb and chorus. 16 factory presets, 16 of yours. Play it in the browser first.

Text by the maker.

About it

Runs on
FM-1 · Browser ↗
Release
0.2.0 · released 15 Nov 2026 · on the hub since 16 Nov 2026595 KB · what's new
Licence
GPL-3.0 · source ↗ · copy on the hub
Flash chip
Every FM-1, the newer chip 0xB36014 too
Identity
FM-1_627010what it reports over USB while it runs
Build
Built by GitHub Actions from f7aea06, signed

Like ObsSynth FM-1

Changelog

What changed, version by version3 versions

0.2.0 - 2026-11-15

  • SUPER: a shape for its seven voices, the oscillator's WAVE on its + page (WAVE SIDE, then NOISE NCOL or SYNC RING): SAW as before; SQR, DETUN also spreading the side squares' widths (50 +- 30 %), hollow like a PWM; TRI, a narrower spread and a fold on the sum that grows with DETUN; SIN, seven detuned sines, the slow beating of an organ or a pad. STD is unchanged. New presets F15 SQUARES (SUPER SQR) and F16 GLASS (SUPER TRI).

0.1.1 - 2026-11-15

  • Package: a new identity, FM-1_627010, ObsSynth's own (FM-1_917 was inside Felucca's FM-1_91x range). Nothing else changes; from 0.1.0, install it as usual.

0.1.0 - 2026-11-12

  • Oscillators: two per voice, each with its own engine (ALGORITHM): STD (SAW SQR TRI SIN RAMP FOLD FM OCT, shaped by PW), SUPER (seven detuned saws), WT (four wavetable banks, alias-free) or GRAIN (granular over three samples).
  • Voice: OSC 2 with SEMI, FINE and MIX; SUB and NOISE in six colours; SYNC and RING; a 12 or 24 dB filter (LP BP HP NOTCH) with DRIVE; amp and filter ADSRs with velocity, key tracking and LOOP; GLIDE.
  • Modes: POLY (4 voices), MONO, LEGATO and UNI (the four voices on one note, detuned and spread in stereo).
  • Modulation: two LFOs (SIN TRI SAW SQR S&H, 0.05 to 40 Hz) with TRIG, FADE and PHASE, each to one destination, per oscillator too.
  • Effects: delay, room reverb (Hortator's) and a stereo chorus; stereo out with a soft clip.
  • Presets: 14 factory sounds and 16 of your own on the flash (A/B records: a power cut keeps the previous bank).
  • Screen: each page draws what it edits (the envelope curves, the LFO wave, the filter response, the wavetable, the live grains), in the ObsSynth palettes.
  • GLOBAL: MIDI channel, master tuning, velocity curve, button lights and the screen palette, kept apart from the presets.
  • USB: class-compliant USB-MIDI in, the M-UPGRADE update entry and Felucca's update loader, so the FM-1 can always leave this firmware again.
  • Flash: both FM-1 flash chips (Puya P25Q80 and the UC25HQ80 of units sold since autumn 2026).
  • Package: identity FM-1_917; built and signed by GitHub from the tagged source (fm1-build).

CHANGELOG.md on GitHub ↗